The F42 Air Intake Filter is recommended for use on the intakes of centrifugal compressors, fans, blowers, engines and turbines where dust-free process air requirements are highly critical and there is a need for additional silencing of the air intake system. When used on the inlets of compressors, engines and blowers, and appropriate silencer must be installed between the air moving device and the filter.

The F42 Series employs a three-stage filtering system which consists of a Type F3 primary, a Type F4 intermediate and a Type F5 final filter. The rigid housing designed to accept standard 24" x 24" filter elements, wherin the final filter contains a fluid seal to prevent bypass. The internal design provides a safeguard to prevent samll size foreign objects from entering the air intake passageway when filters are removed. To effectively reduce intake noise, a silencing device is designed into the filter housing air outlet nozzle. This silencer is designed so there is no increase in the housing pressure drop. The minimum efficiency of the final filter is not less than 99.97% (by DOP test method) on 0.3 microns and above. Field tests indicate final filters need to be changed once every 18 to 24 months if the primary and intermediate filters are properly serviced. Special designs are available upon request. View Filter Elements here.

Welded sheet and plate steel construction. Metal joints are sealed to prevent dirt and air from by-passing the filter element. Surfaces are prime coated, followed with a final coat of machinery enamel. Flanges are drilled to match 125 lb. American Standard Flanges. Weatherhoods are included. Special finishes, or materials are available at extra cost.