The F22 Air Intake Filter is recommended primarily for use on centrifigual compressors and fans where it will provide adequate silencing as well as controlled air filtration. It may also be used on the inlets of compressors, engines and blowers; however, and appropriate silencer5 must be installed between the air moving device and the filter/silencer. The silencer design incorporated in the filter housing is mainly effective on the higher frequencies and provides only a small amount of silencing in the low frequencies.

A rigid housing designed to accept standard 24" x 24" filter elements. Various types of elements are available to provide filter efficiencies to meet the needs of engines, blowers, or compressors. Filter housings are available to accept either a single filter element or two filter elements in series. Internal design provides a safeguard to prevent small size foreign objects from entering the air intake passageway when filters are removed. Special designs available upon request. View Filter Elements here.

Welded sheet and plate steel construction. Metal joints are sealed to prevent dirt and air from by-passing the filter element. Surfaces are prime coated, followed with a final coat of machinery enamel. Flanges are drilled to match 125 lb. American Standard Flanges. Weatherhoods are included. Special finishes, or materials are available at extra cost.